Motec ADR Uživatelský manuál stáhnout pdf (Strana 10)

ADR Functionality User Manual Configuration

LEDs Tab

Figure 6 – Device Configuration – Example LEDs Tab

The Intensity of each of the three LEDs on the ADR can be individually configured.

The functions of the parameters on the LEDs tab are as follows.

LED Intensity / Status /

Power/ Data

Used to set the brightness (1% to 100%).

External LED / Enable

external LED

Enable or disable the external LED function. Disable this function if an external

LED is not used. If not disabled, and an external LED is not used, an External

LED open circuit fault is generated.

External LED / Duty Used to set the brightness of the external LED during the power on lamp test.

Further Information:

For details on how the LEDs function; see the LEDs section on page 12.

MoTeC — Published: 11 February 2014 Page 9

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

Žádné komentáře

Motec ADR Uživatelský manuál Strana 10